At Off-Road Handbook, our unwavering dedication to content quality is evident. Prior to publication, each piece of information undergoes a meticulous editorial process, which not only guarantees accuracy but also elevates the overall user experience.

10 Most Common Oreion Reeper Problems- How to Fix Them

The Oreion Reeper series of ATVs has been around since 2015, and they are popular for off-road adventures. Despite their popularity, however, there are some common Oreion Reeper problems that buyers should be aware of before making a purchase.

The most common problems associated with the Oreion Reeper include:

  1. The starting issue
  2. The wiring issue
  3. Stability issue
  4. Weak engine
  5. Faulty seatbelts, and speed limiter
  6. Lack of aftermarket parts
  7. Over-heating problems
  8. Top-speed problems
  9. Clutch problems
  10. Dead battery

In this article, I’ll take a look at some of the most common issues associated with the Oreion Reeper and provide some tips on how to address them.

Basic Features of Oreion Reeper4 Apex:

Feature

Value/Type

Engine Type

Chery Brand 812cc EFI liquid-cooled 3-cylinder four-stroke

Compression Ratio

Ratio: 9.5:1

Bore and Stroke

72mm x 66.5mm

Max Power

39kw/6000rpm

Lubrication

SAE 10W-30

Ignition

Electronic Multipoint Injection

Starting

Electric

Tires/Front

AT27 x 9 x 14 Radial

Tires/Rear

AT27 x 11 x 14 Radial

Fuel Capacity

6.1 U.S. Gallons

Transmission

Manual Five Speed

Wheelbase

85.5"

Front Track

54.5"

Dry Weight

2WD: 1,168 lbs. 4WD: 1,140 lbs.

Ground Clearance

9.8"

Drive Train

Axle

Front Suspension

Independent Double Swing Arm

Rear Suspension

Independent Double Swing Arm

Front Brakes

Hydraulic Disc

Rear Brakes

Hydraulic Disc

L x W x H

10.3 x 5.4 x 5.3 FT

Now that you know the basic features of the Oreion Reeper (4 Apex), let’s jump to the problems and solutions.

1. The Issue with Starting the Oreion Reeper:

One of the significant issues with delays in the starting of Oreion Reeper is an issue with batteries. The problems can be due to the electrical system or bad wiring. 

  • One major issue is the battery and its ability to provide enough power to start the vehicle. If the battery fails to charge adequately or has a dead cell, it can cause the starter not to work. In this case, the engine won’t start, leaving you stranded.
  • Another issue is related to faulty wiring in the vehicle. This can cause problems with the starter not being able to function correctly.
  • Bad alternators can also cause problems with the starting system. The alternator is responsible for charging the battery; if it fails, it can cause the battery not to charge appropriately. Therefore, the starter does not work correctly, resulting in a delay in the vehicle’s starting.
10 Most Common Oreion Reeper Problems

How to Fix:

The best way to tackle the oxide problem is first to check the battery for any buildup of oxides. If you find some, you need to start the process of softening the oxide layer.

You can do this by pouring some battery water on the oxide layer, which will soften and break down the coating. Once you have done this, you can use a scrub brush to try and wipe away the rough layer, ensuring that electricity can flow properly.

However, it is essential to note that this only works if the oxide layer is still relatively thin. If it is too thick, you may need to replace the battery, as the oxide layer prevents electricity from flowing correctly.

Once the issue with the battery is taken care of, the Oreion Reeper should be able to start just fine.

If you want to jump-start your vehicle, you can follow these steps:

STEP

Action

Description

STEP 1

Avoid the electronic system of ignition

Get an external power source that can be a good-condition vehicle, along with a charged battery and jumper cables.

Avoid starting the vehicle with an electronic ignition system, as it can damage the vehicle.

STEP 2

Clips of jumper cables

Park both vehicles in parallel positions to each other. Attach the jumper cables' red clips to both batteries' positive terminals.

Next, attach the black clips with the negative terminals of charged battery only. Finally, attach the second black clip to the unpainted part of the metal of your vehicle.

STEP 3

Running the vehicle

Run the vehicle for a few minutes to start working. Let the vehicle run for 10 minutes after a jump start, and unplug the jumper cables.

Avoid shutting down the car, as it will hinder the charging of the battery.

STEP 4

Help of a mechanic

If the issue in starting the vehicle was due to poor wiring or an alternator, you can replace them or get them fixed with the help of a mechanic. It is recommended to check all the parts of the ATV vehicle during the purchasing phase, especially the battery.

2. Problem with Wiring in the Oreion Reeper:

One of the most common problems with the Oreion Reeper series of off-road vehicles is related to the wiring system.

Poorly connected wiring or incorrect installation of electrical components such as wires, connecting terminals, or cables can lead to various wiring issues, such as stalling, idling, and even engine starting issues.

The wiring in your Oreion Reeper can be accessed by opening the hood and removing the panel beneath the steering. While it’s rare for the internal wiring to come off or be damaged while driving, it’s still possible.

It’s important to note that all Oreion vehicles receive thorough inspections before being sent to consumers. However, even the most meticulous inspections can sometimes miss an issue with the wiring.

Various signs detect damaged cables, including the attempt of fire in the car and the problem with jolts. The vehicle will not start if the wires are disconnected or the engine performs poorly. 

How to Fix:

The wiring problem in Oreion Reeper can be fixed by removing the hood and replacing the panel seen under the steering. There are various wirings under it.

To ensure that you don’t have any wiring issues, it is essential to check all the wiring periodically, especially if you have a lot of mileage on your Reeper.

This means checking the connections between the battery and the alternator and all the individual wires that run from the engine, transmission, and other components.

If any cables are corroded, loose, or cracked, you must replace them at once. Corrosion can cause a lot of problems, and it can easily lead to a breakdown in the wiring system.

To replace the cables, you will need to get the correct size, length, and type of cables for your Reeper.

In some cases, you may need to take your Oreion Reeper to a workshop so they can diagnose any wiring problems that you may have.

They will use a diagnostic scanner to check the wiring and see if the problem is related to corrosion, loose connections, or a damaged component. If the problem is with the wiring, then they should be able to fix it for you.

3. Issue of Stability in Oreion Reeper:

Unfortunately, several Oreion Reeper owners have experienced issues with the stability of their vehicles.

The most common problem is the excessive bouncing or wobbling of the vehicle at high speeds, especially when going off-road. This can be caused by several factors, ranging from worn-out suspension systems to incorrect tire inflation.

Incorrect tire pressure can be the root cause of instability issues in Oreion Reeper. When the tires are not filled up to the recommended Psi, the vehicle may be prone to bouncing and wobbling.

This is why it is essential to ensure that your tires are correctly inflated aknd suitable for the terrain you are driving on.

If the issue persists, it could be due to a worn-out suspension system. This is because the suspension system provides support and stability to the vehicle. If it is worn out, the vehicle will not be able to handle the terrain as smoothly as it should.

10 Most Common Oreion Reeper Problems

It is also essential to ensure that the shocks are in good working order, as they are responsible for absorbing the bumps and shocks from the road. The vehicle will be more prone to bouncing and shaking if the shocks are worn out.

Finally, ensuring that the steering is functioning correctly is also essential. If the steering is not correctly adjusted, the vehicle will be more prone to instability.

How to Fix:

  • STEP 1: The tires are the first and most apparent cause of instability in the Oreion Reeper. Tires that are improperly inflated have too much or too little tread, or are the wrong size can all cause issues with stability while you are driving. As such, checking your tires regularly is essential to ensure they are correctly inflated and have sufficient tread. 

If you notice that the tires are starting to show signs of wear and tear, it’s time to get them replaced. Additionally, make sure to get tires that match the size of your vehicle’s rim.

  • STEP 2: If you find that the issue is not related to the tires, it could be due to the suspension of your Oreion Reeper. A suspension malfunction can cause the vehicle to bounce and jostle, making it challenging to maintain a stable ride. 

If you believe that the suspension on your Oreion Reeper is faulty, it’s best to take it to a professional mechanic for inspection.

  • STEP 3: Finally, if you are having trouble maintaining a stable ride in your Oreion Reeper, check the weight distribution of your vehicle. Improper weight distribution can cause your vehicle to be unbalanced while driving, making it difficult to maintain control. 

Consider having a professional adjust the weight distribution on your Oreion Reeper if you notice a lack of stability while driving.

4. Weak Engine of the Oreion Reeper:

A weak engine is one of the most common issues with the Oreion Reeper. The engine in this off-roading vehicle can become weak due to a lack of maintenance, and riding at high speeds puts a load on the engine, affecting its performance.

As a result, many Oreion Reeper riders have complained of underpowered engines.

Although the engine is reliable enough, riders who are used to more powerful engines and high speeds may not find the performance they are looking for.

How to Fix:

One of the first things you should do is check the spark plugs and replace them if necessary. If the spark plugs are worn, they can cause the engine to run rough and affect your ATV’s performance.

You should also check the fuel filter and replace it if necessary, as clogged fuel filters can cause the engine to lose power.

Finally, if your ATV has an ignition system, check to ensure all the components are in good working order.

If you find that none of these fixes resolves the weak engine issue, it is recommended to replace the weak engine with a new one, or you can get it repaired by a mechanic.

In addition, you can seek help from an automobile workshop where they can check the engine of your ATV and can provide you with repair and replacement services.

5. Fault in the Seatbelts, Speed Limiter, and Red Reflectors:

Customers of Oreion Reeper reported severe issues with the speed limiters, red reflectors, and seatbelts of the vehicle, which disturbed their off-roading experience.

Few users reported that speed limiters and red reflectors were missing in their vehicles, preventing them from reaching maximum speed during off-roading.

Similarly, it was reported that some models from 2011 and 2013 hold faulty seatbelts, which disturb the driver during off-roading.

Therefore, in few instances, there was no protection for the rider during off-roading due to a lack of seatbelts, a manufacturing fault.

Oreion Motors LLC (Oreion) has issued a recall that covers 526 variants for the model year 2011-2013 Reeper low-speed vehicles. The recall is being conducted to address a potential safety issue related to faulty seatbelts.

How to Fix:

If there is an issue with seat belts, red reflectors, and speed limiters in your side by side, it is better to consult the manufacturers before getting them fixed by a simple mechanic.

If your speed limiter or red reflectors get damaged for a specific reason, you can seek help from a mechanic, but for a missing piece of seat belt, it is better to consult the manufacturers.

6. Limited Customer Assistance and Lack of Aftermarket Parts:

The lack of customer care assistance and aftermarket parts is one of the most common issues reported by customers of Oreion Reeper vehicles.

These vehicles are assembled in the USA (origin- China); however, customers from several states have difficulty finding the exact aftermarket components or parts for their vehicles. Without access to aftermarket parts, it can be challenging to maintain or repair your Oreion Reeper.

Another problem with Oreion Reeper is the limited customer assistance. The company does not directly deal with the consumers, and since it does not have a widespread dealership network, it can be difficult for customers to trust the brand for long-term use.

In addition, customers have reported that the manufacturer’s customer care services are often slow and unresponsive to inquiries.

With limited aftermarket parts and customer care assistance, customers of Oreion Reeper can face several problems, such as difficulty maintaining or repairing their vehicles, slow response times when seeking help, and a lack of trust in the brand.

These issues can be particularly problematic for customers who depend on their Oreion Reeper vehicles for everyday use.

How to Fix:

If there is an issue with the associated parts of Oreion Reeper, it is better to consult a good mechanic as its parts are not available easily in the market.

This is not a popular brand, so mechanics often face difficulty getting the exact aftermarket parts for repair.

It becomes a challenging situation sometimes, which can be fixed with customer service assistance after visiting the manufacturers.  

7. Over-Heating Problems in the Oreion Reeper:

Overheating of the Oreion Reeper engine is another problem during the summer season. The vehicle’s quad delivers some red flags, which are a sign of alertness that it is wrong with the engine.

The signs of overheating include:

  • The presence of heat through the engine
  • Sudden power loss in the vehicle
  • Oil and fluid leaks
  • Production of disturbing sound from the engine

How to Fix:

If your vehicle is overheating, it is better to check the radiator and coolant levels. The low coolant levels in the vehicle and the presence of a faulty radiator lead to overheating of the engine.

Refill the coolant level if it is low, and keep the engine clean.

8. Top-Speed Problems in the Oreion Reeper:

  • The first and foremost factor responsible for this issue is the lack of firmness in the vehicle. Even if the vehicle is new and in perfect condition, it can still suffer from top-speed issues due to a lack of firmness. This can be rectified by getting the vehicle serviced and checking the suspension. 
  • The next factor is the kind of tires you have installed in your vehicle. Old and worn-out tires can cause the vehicle not to reach its top speed, resulting in a poor off-road experience.

How to Fix:

The most common problem that can lead to decreased top speed is worn-out or damaged tires. If the tires are worn down or suffer from a puncture, they will not be able to provide the same amount of grip and traction as a fresh pair.

This can lead to a decrease in top speed, as the vehicle will not be able to accelerate as quickly.

Thankfully, replacing worn-out or damaged tires is a straightforward process. To begin, you should determine the tire size needed for your particular Oreion Reeper.

Once you have the right size, you can purchase new tires from a local store or online retailer or purchase a factory-recommended set for your Reeper.

9. Clutch Problems in the Oreion Reeper:

The clutch is an essential component of any vehicle and is responsible for smooth and efficient gear shifting. Without a properly functioning clutch, the vehicle will struggle to accelerate and produce a squeaking noise as it shifts from one gear to the next. 

The clutch can wear out quickly due to the extreme off-road conditions that the Oreion Reeper is often subjected to. Not only will the clutch wear out more quickly, but it will also lead to slower acceleration and more difficulty in shifting the gears.

The common problems in the failure of the clutch include:

  • Gear shifting problems
  • Lack of acceleration in the vehicle
  • Production of a squeaking noise from a vehicle

How to Fix:

If your vehicle is facing clutch issues, you can replace it with a new pair or can get it repaired through the help of your mechanic or an authorized dealer of Oreion manufacturers.

The clutch can show the symptoms of slipping due to less traction and ends up in power loss, so it is better to detect the clutch issues beforehand to avoid any inconvenience.

10. Issue of Dead Battery in the Oreion Reeper:

If you are an Oreion Reeper owner, chances are you have experienced the issue of a dead battery in your vehicle.

The most common reason is leaving the vehicle with the lights and accessories on for a prolonged period.

Using a multimeter, you can easily detect a dead battery in your vehicle.

How to Fix:

You can deal with the dead battery of the vehicle using a multimeter. Connect the multimeter to your battery and check the meter reading.

If the reading is below 12V, this indicates low charging, and there are chances that the battery can be repaired and fixed. But if the battery is completely damaged, the only solution left is its replacement.

Cost of an Oreion Reeper:

The average price for Oreion Reeper is between $17500-$20,000, which applies to all the standard and exclusive vehicle models. However, each model has different specs and features, so that prices can vary.

Oreion Reeper Model

Capacity

Engine

Price

Oreion Reeper Apex

2-seater

1100cc

$19,995

Oreion Reeper Sport

2-seater

1100cc

$17,495

Oreion Reeper4

4-seater

1100cc

$20,995

Oreion Reeper4 Apex

4-seater

1100cc

$21,000

There are some cheap models for Oreion Reeper, too, which cost less than the average price, but if you want an excellent piece having top-notch quality specs, then it is better not to worry about the price.  

Oreion Reeper Users’ Feedback/Review:

Let’s see what the users of Oreion Reeper think about the vehicle:

Oreion Reeper Users' Feedback/Review 1
Oreion Reeper Users' Feedback/Review 2

Regarding side-by-side vehicles, the Oreion Reeper series of vehicles has received much attention lately. The Oreion Reeper is Chinese-made side by side, but they are now assembled in the USA, so the build quality is quite good.

The reviews from people who have used an Oreion Reeper have been generally positive. People who have used a Reeper have found it reliable and packed with features - from a powerful engine to comfortable seating.

Of course, some people have had a few issues with the Oreion Reeper – from a few mechanical problems to the occasional breakdown. But, overall, most of the issues have been minor. Most users have been pleased with their Oreion Reeper and have had no major vehicle problems.

In addition, people have been impressed with the value they get from their Oreion Reeper. It offers many features and performance for a relatively low price compared to other side-by-side vehicle.

Overall, the feedback for the Oreion Reeper has been mostly positive. People have found it reliable and packed with features while also being a great value. If you’re in the market for a side-by-side, the Oreion Reeper is worth considering.

Final Thought:

In conclusion, the Oreion Reeper ATV is an excellent vehicle for off-roading and a dependable machine overall. However, specific common issues can arise if not taken care of.

It is essential to be aware of these issues and take the necessary precautions to avoid them. By following the manufacturer’s instructions, it is possible to prolong the vehicle’s life and enjoy many years of reliable fun.

Also Read:

8 Most Common Kawasaki Mule 4010 Problems- Here’s How to Fix
Kawasaki Mule Pro FXT: How to Fix the Most Common Problems
8 Most Common Problems with Can-AM Outlander 570- How to Fix
7 Common Polaris RZR 800 Problems- How to Fix Them
8 Common Yamaha Rhino 660 Problems- How to Fix Them
7 Common Coleman 550 UTV Problems- How to Fix
Honda 300EX Top Speed, Features, Pros & Cons- Overview

Frequently Asked Questions (FAQs):

What range of top-speed is offered by an Oreion Reeper?

The average top speed provided by the Oreion Reeper is 60 mph.

Which kind of engine is used in the Oreion Reeper?

The Oreion Reeper is powered by a multi-port fuel-injected 812cc triple engine producing 58 horsepower and a staggering 40+mpg on roads.

What is the average cost price of Oreion Reeper?

The average base price of an Oreion Reeper is listed as $19900. Therefore, the average retail and the total price are the same as the base price.

Where are the Oreion vehicles manufactured?

The Oreion vehicles are manufactured in the New Mexico plant responsible for assembling the vehicles.

How much is the cost required for repairing the Oreion Reeper ATV?

The average base price for repairing the Oreion Reeper is $17000. Therefore, the average retail and the total price are the same as the base price.

Who is responsible for manufacturing the Arctic cat side-by-side vehicles?

Arctic car side-by-side vehicles are manufactured by Textron, which joined their team in 2017. These vehicles are now designed by Textron specialized vehicles.

Which ATV vehicles are considered as the valuable option regarding budget?

 The best valuable and budget-friendly ATV vehicles are listed below:

  • Kawasaki Brute Force-300
  •  Honda Rancher FourTrax
  •  Polaris Sportsman-450
  •  Yamaha Kodiak-700
  •  Can-Am Outlander-450

Which ATV vehicles are considered the most powerful ones?

 The most powerful ATV vehicles are listed below:

  • Phantom ATV
  •  Can-Am Outlander X-MR-1000R
  •  Can-Am Renegade X-MR-1000R
  •  Polaris Sportsman XP-1000